|
-Intelligent
CAN Interface for ISA Bus Systems
 |
The
iPC-I 165 represents a very powerful and economic solution of an
active CAN board with one or two CAN channels, covering a wide range
of CAN applications.
The
16 bit on-board microcontroller allows, among many other features,
the filtering, prepro-cessing, and storage (with timestamp) of CAN
messages as well as the real-time transmission of CAN messages.
Due
to the powerful microcontroller this can be made for both CAN controllers
simultaneously without losing any data, even in systems with a high
bus load.
In
combination with the CAN driver (VCI), the iPC-I 165 allows an easy
integration of PC supported CAN applications. In addition the iPC-I
165 is well suited for the use with the IXXAT analysis and configuration
tools as well as for the use as a CANopen network controller.
|
Technical
Data
| PC
bus interface |
ISA
bus, 16 bit |
| PC
address range |
C000h-E000h,
adjustable in 16 kByte steps |
| Interrupts |
IRQ
3, 4, 5, 7, 9, 10, 11, 12, 14, 15 |
| Microcontroller |
Infineon
SAB C165, clocked with 20 MHz |
| Memory
extension |
up
to 2 MByte SRAM(basic version 512 kByte), up to 1Mbyte FLASH(basic
version 512 kByte), 8 kByte DPRAM |
| CAN
controller |
up
to two Philips SJA1000 |
| CAN
bus interface |
ISO/IS
11898-2, Sub D9 connectors according to DS102, optional galvanic decoupled |
| Power
Supply |
5V
DC, 300 mA typ., provided by PC |
| Size |
approx.
110 x 220 mm |
|
