|
-Intelligent
CAN Interface for PCI Bus Systems
 |
The
iPC-I 165 PCI represents a very powerful and economic solution of
an active CAN board with one or two CAN channels, covering a wide
range of CAN applications. The interface is state-of-the-art, supports
PCI and can be easily installed by Plug & Play. The 16 bit on-board
microcontroller allows, among many other features, the filtering,
preprocessing, and storage (with timestamp) of CAN messages as well
as the real-time transmission of CAN messages. Due to the powerful
microcontroller this can be made for both CAN controllers simultaneously
without losing any data, even in systems with a high bus load. In
combination with the CAN driver (VCI), the iPC-I 165/PCI allows an
easy integration of PC supported CAN applications. In addition the
iPC-I 165/PCI is well suited for the use with the IXXAT analysis and
configuration tools as well as a CANopen network controller. |
Technical
Data
| PC
bus interface |
PCI
Bus (Specification 2.1), 32 bit, 5V |
| PC
address range |
Plug
& Play, 16 kBytes memory and 128 bytes I/O area |
| Interrupts |
INT
A, Plug & Play |
| Microcontroller |
Infineon
SAB C165, clocked with 20 MHz |
| Memory
extension |
512
kByte SRAM,5 12 kByte FLASH, 8 kByte DPRAM |
| CAN
controller |
up
to two Philips SJA1000 |
| CAN
bus interface |
ISO/IS
11898-2, Sub D9 connectors according to DS102, optional galvanic decoupled |
| Power
Supply |
5V
DC, 300 mA typ., provided by PC |
| Size |
approx.
130 x 175 mm |
|
