Chinese Version

PC-I 04/104
 

-Passive CAN Interface for PCI/104 Bus Systems
The PC-I 04/104 PC/CAN interface is a passive board (i.e. no microprocessor on board) for the PC/104 bus with up to two CAN channels. It represents a very economic solution when connecting a PC to a CAN network in cases of lower real-time capability requirements.

Technical Data

PC bus interface PC/104 bus, 8 bit (16 bit connector for IRQ 10-15)
PC address range C000h-E000h, adjustable in 4kB steps
Interrupts IRQ 3, 4, 5, 6, 7, 9, 10, 11, 12, 14, 15 separated for each CAN controller (shared interrupt is supported)
Microcontroller None
CAN controller up to two Philips SJA1000
CAN bus interface ISO/IS 11898-2, bent 2 x 5 pin connectors according to DS102, optional galvanic decoupled
Power Supply 5V DC, 130 mA typ., provided by PC
Size approx. 90x 96 mm

 

 The 10th Floor, Quantum Plaza, No. 27, Zhichun Road, Haidian District, Beijing, 100083, P.R. China
Tel: +86-10-82357579, 82357580, 82357576

Fax: +86-10-82357574
info@mcu-world.com