SBC
Module Description(nanoMODUL-164)
The
nanoMODUL-164 brings Infineon 16-bit power and CAN connectivity
to a very minimal form factor (47 x 38 mm). Based on the Infineon
C164CI controller, the board delivers instruction cycles in 100ns,
enabling speedy data throughput. The on-chip 8-channel A/D converter
with 10-bit resolution, Full 2.0B CAN interface and all other
controller signals extend to 1.27mm pitch pin headers aligning
the board's edges. The standard memory configuration boasts 256KB
of both SRAM and Flash memory.
|
SBC
MODULE FEATURES(nanoMODUL-164)
- Single
Board Computer in subminiature dimensions (47 x 38 mm)
- Infineon
C164CI controller (20MHz)
- All
controller signals extend to high-density (1.27mm) pin connectors
at board's edges
- 256KB
(to 1MB) external SRAM
- 256KB
(to 2MB) external Flash
- Bootstrap
Loader enabling on-board Flash programming
- 8-channel
A/D converter with 10-bit resolution
- Full
2.0B CAN interface (max. 512KB SRAM and 512KB Flash if CAN interface
active)
- RS232
interface via UART
- Real
Time Clock and Watchdog Timer
- various
timers supporting Capture/Compare, PWM
- operates
within a standard temperature range of 0 ~ 70 C
SBC
MODULE FEATURES(DIPmodul-164)
- 16-bit
Single Board Computer (24 x 56mm) in DIP-40 format achieved through
advanced, low EMI SMD technology
- Infineon
C164CI controller (QFP-80)
- All
controller and decoded interface signals extend to pin headers
(DIPmodul-connector) on two sides of the board
- 32KB
(to 256KB) external SRAM
- 128KB
(to 256KB) external Flash, supporting on-board Flash programming
- 2
to 64KB serial EEPROM
- on-chip
Bootstrap loader
- no
dedicated Flash programming voltage required through use of 5V
Flash devices
- RS232
interfaces (TTL level)
- 2.0B
active CAN interface with 82C251 CAN transceiver
- Real
Time Clock on the C164CI, Watchdog Timer
- improved
EMI safety achieved through multi-layer technology
- can
be plugged like a "big chip" into target applications
- available
with CANopen firmware
- voltage
supply of +5V/80mA
|
|
SBC
Module Description(DIPmodul-164)
The
DIPmodul-164 is a small form-factor addition to the PHYTEC SBC module
line. This tiny yet highly cost-effective insert-ready Single Board
Computer is based on the Infineon C164CI 16-bit microcontroller
featuring on-chip CAN in MQFP-80 packaging. The size of a 40-pin
DIP device with single row SMD pin header connectors in 2.54mm pitch,
the board is designed for use as a universal core compoinet in a
customer application design. This enables the DIPmodul-164 to be
used like a network node within a CAN system.
|
