Chinese Version

phyCORE-161
-C166-Core Loaded with on-chip Peroipherals

SBC MODULE FEATURES

  • SBC in subminiature dimensions (60 x 46 mm) according to low EMI phyCORE specifications
  • Infineon C161CS (optional C161JC, C161JI) with 100 instruction cycle time at 20MHz
  • on-board Bootstrap loader
  • All ports and decoded interface-signals extend to high-density (0.635mm) Molex pin connectors aligning the edges of the circuit board
  • Memory Configuration:
  • -256KB SRAM(optional 1MB)
  • -256KB (optional 128KB, 512KB, 1MB, 2MB) Flash
  • -1KB (optional 4KB, 8KB, 32KB) Serial EEPROM (optional FRAM)
  • 16-bit demultiplexed bus mode
  • battery-buffered SRAM
  • serial battery-buffered Real-Time Clock
  • RS232 transceivers supports two serial interfaces
  • CAN transceivers (SI92000 or 82C251, 2 x CAN if populated with the C161CS)
  • SDLM (if populated with the C161JC)
  • optional UART supporting a second asynchronous interface (supporting RTS, CTS ans DSR modem signals)

SBC Module Description

The phyCORE-161CS supports the Infineon C161CS, C161JC and C161JI 16-bit controllers in TQFP-128 packaging. These chips offer a high price-performance value, are based on the C166 controller core, and integrate a variety of supplemental on-chip components. The board can be populated with up to 2MB external Flash and up to 1MB external RAM memory. The Flash device supports convenient on-board programming in conjunction with PHYTEC FlashTools. With its many derivatives, the C161 offers the user a variety of integrated features, allowing for maximum design and expansion to external devices. An additional feature of the phyCORE-161CS is the possibility of rerouting CAN to port pins, providing full 16MB address space.

 

 The 10th Floor, Quantum Plaza, No. 27, Zhichun Road, Haidian District, Beijing, 100083, P.R. China
Tel: +86-10-82357579, 82357580, 82357576

Fax: +86-10-82357574
info@mcu-world.com