|
|
SBC
MODULE FEATURES
- subminiature
Single Board Computer in 57 x 70 mm dimensions according to low
EMI phyCORE design
- Intel
PXA255 XScale microprocessor
- controller
and board-level signals extend to two high-density (0.635 mm)
160-pin Molex connectors on underside of SBC
- Memory
Management Unit (MMU) for virtual addressing of the memory, enabling
support of Linux and WinCE
- on-board
memory:
- -SDRAM:
up to 128MB
- -Flash:
up to 64MB
- free
Chip Select and GPIO signals
- JTAG
interface
- 2
x MMC or SD card interface, 1 x MMC slot
- Signals
for controlling two PCMICIA sockets
- integrated
LCD Controllers for DSTN and TFT displays with up to 640x480 16-bit
resolution
- full
UART with 230 kBaud and all modem signals, IrDA UART, BT UART
(class 2 Bluetooth)
- 10/100
Mbits/s Ethernet controller
- Full
speed ISP1361 USB Host (OTG) controller
- AC97/I2S
interface for Audio Codecs
- SPI-I2C
and CAN interfaces
|
 |
SBC
Module Description
The
phyCORE-PXA255 is designed for use in industrial applications that require
high processing speed with low power. All that is required for operation
is a single supply voltage of 3.3V. 128 MB SDRAM and 64 MB Flash are integrated
on the subminiature (57 x 70 mm) Single Board Computer module. The program
memory can be expanded on the module with memory cards in the 8 to 512
MB range. An SPI port expander with 28 GPIOs for matrix keypads and a
touch screen controller are also available on the phyCORE-XScale/ PXA255.
A 10/100Mbps Ethernet and a CAN controller also populate the module, enabling
connection of the phyCORE-PXA255 to networks. All controller and peripheral
signals extend to two 160-pin Molex connectors on the underside of the
phyCORE-XScale/PXA255.
|
Development
Board
Phytec
Development Boards are fully equipped with all mechanical and electrical
components necessary for the speedy and secure start-up and programming
of Phytec Single Board Computer modules:
- Development
Board (225 x 170mm) with slot for CompactFlash Expansion Board
- 2x
RS232, 1x CAN, 1x Ethernet interfaces
- 1x
USB Client, 2x USB Host interfaces
- direct
interface to 2.5" hard drive
- matrix
keyboard interface
- easily-accessible
JTAG interface
- 1x
Multimedia Card (MM/SD-Card) socket
- Expansion
Bus enabling connectivity to Add-on hardware
|
|
Rapid
Development Kit
Phytec
Rapid Development Kits provide all necessary ingredients with which
to jump start embedded designs and propel concept to prototype and
finished product:
- phyCORE-XScale/PXA255
Single Board Computer module
- phyCORE-XScale/PXA255
Development Board
- flatband
JTAG cable
- serial
cable, parallel cable, Ethernet crossover cable, AC adapter
- Phytec
Tool CD including SBC hardware manual, software, Linux and WinCE
4.2 RTOS kernels and Controller User's Manual
|
About
Intel XScale/PXA255>>>
|
