Chinese Version

phyCORE-SC520
-SBC with 586-compatible CPU

SBC MODULE FEATURES

  • Single Board Computer in subminiature dimensions (72 x 57 mm) according to phyCORE specifications
  • AMD Elan SC520 controller (133MHz)
  • controller and board-level signals extend to two high-density (0.635mm) 160-pin Molex connectors on underside of SBC
  • on-board memory:
  • -SDRAM: 16 to 64 MB
  • -Flash: 1 to 8 MB
  • -128 byte to 2KB serial EEPROM
  • 2x RS-232 interfaces (COM1 and COM2) and 2x TTL-level interfaces (COM3 and COM4), all modem-capable
  • 5V IDE, floppy, keyboard, mouse, speaker and bi-directional parallel port interface
  • IrDA interface
  • mini EdgeCard JTAG interface
  • Ethernet controller
  • 33MHz 3.3V PCI bus (Rev. 2.2), 3.3V address bus, 16-bit 5V ISA, data and control bus
  • 6x freely programmable chip-select signals, 9x interrupt inputs, 8x programmable I/O signals, 2x DMAchannels
  • auto power management via Super-I/O controller, battery backup of CMOS and RTC

SBC Module Description

The phyCORE-SC520 is a PC/AT compatible Single Board Computer module with high integration density that maintains nearly all properties of an AT-mainboard. In addition to the integrated AT-functions of the AMD Elan SC520, the module offers many standard interfaces and bus systems. A PCI and a 16-bit ISA bus enable communication of the module to external devices, such as VGA displays and Ethernet controllers. Additional interfaces (keyboard, floppy, bi-directional LPT1: parallel port, SSI synchronic serial interface, four modem-capable RS-232 interfaces) allow connectivity to peripheral hardware. The floppy disk interface can be replaced with an optional IDE interface. A noteworthy feature of the phyCORE-SC520 module is its flexible memory expansion with 32-bit SDRAM devices, as well as 16- or 32-bit Flash and serial EEPROMs. The module further offers the proprietary serial AMDebug interface, including JTAG-port, which is available through a mini Edge-Card connector.

Development Board

Phytec Development Boards are fully equipped with all mechanical and electrical components necessary for the speedy and secure start-up and programming of Phytec Single Board Computer modules:

  • Development Board (160x130mm) with expansion slots for PC/104, PC/104plus and CompactFlash
  • PS/2 connectors for mouse and keyboard
  • floppy disk interface via 34-pin 2.54mm connector
  • IDE interface via 44-pin 2.54mm connector
  • 25-pin LPT; COM1, COM2 via 9-pin RS232

 

  

Rapid Development Kit

Phytec Rapid Development Kits provide all necessary ingredients with which to jump start embedded designs and propel concept to prototype and finished product:

  • phyCORE-SC520 Single Board Computer module
  • phyCORE-SC520 Development Board
  • serial cable
  • Phytec Tool CD including SBC hardware manual, evaluation compiler, software demos and Controller User's Manual

About AMD Elan SC520>>>

 

 The 10th Floor, Quantum Plaza, No. 27, Zhichun Road, Haidian District, Beijing, 100083, P.R. China
Tel: +86-10-82357579, 82357580, 82357576

Fax: +86-10-82357574
info@mcu-world.com