|
|
SBC
MODULE FEATURES
- Single
Board Computer in subminiature (60 x 53 mm) dimensions according
to phyCORE low EMI specifications
- populated
with the Infineon XC161CJ microcontroller (TQFP-144 packaging)
featuring two on-chip 2.0B CAN modules, 128 KB on-chip Flash and
OCDS
- controller
and board-level signals extend to two 100-pin high-density (0.635mm)
Molex connectors on underside of SBC
- on-board
memory: a.SRAM: 512KB with 15ns access (optional 256 KB to 1 MB
55 ns access); b.Flash: 256KB to 2MB, In-System-Programming (ISP);
c.Serial: 4 to 32KB EEPROM, alternative 256 byte SRAM or 512 Byte
FRAM
- 16-bit
demultiplexed bus mode
- RS232
transceiver supports two serial interfaces
- 10
Mbit/s CS8900A Ethernet controller
- optional
CS8900A Ethernet controller
- 2
x 82C251/TLE6250 CAN interfaces
- OCDS
interface
- I2C
RTC
- 12
channel 10-bit A/D converter
- up
to 40 MIPS
- DSP
support with built in MAC unit
|
 |
SBC
Module Description
The
phyCORE-XC161 supports the Infineon XC161 in a TQFP-144 package. Based
on the new C166 V2 core, the XC161 offers flexible PWM units for all sorts
of motor control applications, impressive DSP performance, and advanced
interrupt handling for demanding industrial and automotive applications.
The XC161 offers 128 KB on-chip Flash, dual on-chip CAN, a 12-channel
10-bit ADC, a 16-bit demultiplexed bus, and an on-chip OCDS debug interface.
Both the on-chip and external Flash can easily be programmed on board
using Phytec FlashTools. Data transfer rates of 10 Mbit/s are possible
with the on-board CS8900A Ethernet controller. All controller and periperal
signals extend to two 100-pin high-density Molex connectors on the underside
of the phyCORE-XC161.
|
Rapid
Development Kit
Phytec
Rapid Development Kits provide all necessary ingredients with which
to jump start embedded designs and propel concept to prototype and
finished product:
- phyCORE-XC161
Single Board Computer module
- Ethernet
adapter
- Parallel-to-OCDS
adapter
- serial
cable, AC adapter
- Phytec
Spectrum CD including SBC hardware manual, evaluation compiler,
software demos and Controller User's Manual
|
|
Development
Board
Phytec
Development Boards are fully equipped with all mechanical and electrical
components necessary for the speedy and secure start-up and programming
of Phytec Single Board Computer modules:
- Development
Board in EURO-card dimensions (100 x 160mm)
- 2x
DB-9 sockets for RS-232 interfaces
- 2x
DB-9 plugs for CAN interfaces
- 2x
opto-decoupled CAN transceivers
- address,
data, interfaces and all applicable I/O signals route from module
to dual 160-pin Expansion Bus, enabling connectivity to Add-on
hardware
|
About
Infineon XC161CJ>>>
|
